Fitment:
- 2020 Polaris Ranger 1000
- 2020 Polaris Ranger 1000 EPS
- 2020 Polaris Ranger 1000 EPS Winter Prep
- 2020 Polaris Ranger 1000 Premium
- 2020 Polaris Ranger Crew 1000
- 2020 Polaris Ranger Crew 1000 EPS
- 2020 Polaris Ranger Crew 1000 EPS Winter Prep
- 2020 Polaris Ranger Crew 1000 Premium
- 2020 Polaris Ranger Crew XP 1000 Northstar
- 2020 Polaris Ranger Crew XP 1000 NorthStar Premium
- 2020 Polaris Ranger Crew XP 1000 Northstar Ride Com
- 2020 Polaris Ranger Crew XP 1000 NorthStar Ultimate
- 2020 Polaris Ranger Crew XP 1000 Premium
- 2020 Polaris Ranger Crew XP 1000 Premium Ride Command
- 2020 Polaris Ranger Crew XP 1000 Texas Edition
- 2020 Polaris Ranger Crew XP 1000 Winter Prep
- 2020 Polaris Ranger XP 1000 EPS Texas Edition
- 2020 Polaris Ranger XP 1000 High Lifter Edition
- 2020 Polaris Ranger XP 1000 Northstar Edition
- 2020 Polaris Ranger XP 1000 Northstar Premium
- 2020 Polaris Ranger XP 1000 NorthStar Ride Command
- 2020 Polaris Ranger XP 1000 NorthStar Ultimate
- 2020 Polaris Ranger XP 1000 Premium
- 2020 Polaris Ranger XP 1000 Premium Ride Command
- 2020 Polaris Ranger XP 1000 Winter Prep
- 2019 Polaris Ranger Crew XP 1000 EPS
- 2019 Polaris Ranger Crew XP 1000 EPS High Lifter
- 2019 Polaris Ranger Crew XP 1000 EPS Northstar
- 2019 Polaris Ranger Crew XP 1000 Premium
- 2019 Polaris Ranger XP 1000 EPS High Lifter Edition
- 2019 Polaris Ranger XP 1000 EPS Northstar Edition
- 2019 Polaris Ranger XP 1000 EPS Ride Command Edition
- 2019 Polaris Ranger XP 1000 Premium
- 2018 Polaris Ranger XP 1000 EPS
- 2018 Polaris Ranger XP 1000 EPS Northstar Edition
Our control arms are designed to maximize ground clearance by carefully arching the lower arms while following the natural angle of the axle.
This provides better clearance, protects your axles, and maintains a clean look - without over-arching, which can increase the risk of damage. Each arm is precision-built to install just like factory parts, and many models feature the High Lifter logo cut into the bracing for added style.
Installation is straightforward with step-by-step instructions and detailed images. You can reuse your stock bushings and ball joints, or choose to have High Lifter preinstall the ball joints before shipping for even easier setup.
Before installing, it’s recommended to check components like bearings, bushings, ball joints, and brakes for wear and replace them if needed to save time and ensure a smooth ride.
Features:
- 25% larger than average stock arms - Crafted from 1 1/4” DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .120” wall thickness
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Most stock powder coat colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
NOTE: These rear arms are NOT raked.
