Ds18 Audio Polaris Rzr Glove Box 10" Subwoofer Enclosure W/ 1200 Watts Carbon Fiber Subwoofer

DS18 Audio Polaris RZR Glove Box 10" Subwoofer Enclosure w/ 1200 Watts Carbon Fiber Subwoofer

DS18"™s RZR-GBSUB10LD takes Polaris RZR sound to the next level with a 10-inch loaded subwoofer enclosure built directly into the glove box. With 600W RMS (1200W MAX) power handling, 2-ohm impedance, and 92dB sensitivity, it delivers deep, accurate bass from 25Hz to 250Hz. Designed with OEM-fit texture, included brackets, and Ride Command harnesses, installation is simple with no cutting or modifications required.

Built from durable polyethylene and IP65 marine-grade rated, this enclosure withstands water, dust, and trail abuse. A port plug cover adds extra protection when not in use, while the glove box design keeps your system discreet yet powerful. DS18"™s RZR-GBSUB10LD is the ultimate weather-resistant bass upgrade for RZR riders who demand both seamless integration and LOUD performance.

Features

• Loaded Subwoofer Enclosure
• OEM Fit - Polaris RZR 2014 - 2023
• Glove Box Compartment Complete Replacement
• 1 X 10" ~ 600 Watts RMS ~ 92dB
• Mounting Hardware & Ride Command Harnesses Included
• Water Resistant IP65

Specifications

General

• Total Watts (Peak): 1200W

• Total Watts (RMS): 600W

• Nominal Diameter: 10" / 254mm

• Nominal Impedance: 2 Ohms

• Sensitivity (1w/1m): 92dB

• Frequency Response: 25Hz - 250Hz

• Recommended Low Pass Crossover: 120Hz

Physical & Construction

• Enclosure Material: Polyethylene (PE)

• Marine Grade Type: IP65

• Sold in Pair or Single: Single

• Color / Finish: Black

• Port Plug Cover: Yes (Rubber)

• Direct OEM Fit: Yes

Woofer

• Voice Coil Diameter: 2" / 50.8mm

• Voice Coil Former Material: Black Aluminum

• Winding Material: SV

• Cone Material: Non-Pressed Paper

• Dust Cap Material: Carbon Fiber

• Surround Material: Rubber

• Basket Material: Steel

• Magnet Material: Ferrite

• Magnet Weight: 81 Oz

Thiele & Small Parameters

• Equivalent Volume (VAS): 23.67L / 0.835 ft³

• Excursion (one way, XMAX): 21mm

• Free Air Resonance (FS): 37Hz

• Mechanical Factor (QMS): 5.07

• Electrical Factor (QES): 0.76

• Total Factor (QTS): 0.66

• Moving Mass (MMS): 140.16g

• Compliance (CMS): 0.13 mm/N

• Bl Factor (BI): 9.26

• Voice Coil Inductance (LE): 0.38 mH

• Diaphragm Area (SD): 352.99 cm²

• DC Resistance (RE): 2.01 ohms

Box

• Sealed Internal Volume: 25.4L / 0.9 ft³

• Sealed Box F3 Response: 64Hz

• Ported Internal Volume: 25.4L / 0.9 ft³

• Port Size (Round): 2.75" x 11.8" / 70x300mm (Diameter x Length)

• Port Tuning Frequency (FB): 36Hz

• Ported Box F3 Response: 32Hz

Box Measurements

• Overall Height: 16.9" / 430mm

• Overall Depth: 14.17" / 360mm

• Overall Width: 16.9" / 430mm

Fitment

• 2014-2022 Polaris RZR Non-Pro XP Models

DS18 Audio (About)

DS18 is a leading electronics manufacturer that focuses on professional audio equipment for all vehicles. Our products are designed and engineered in the USA: and, we have access to multiple factories in Korea, Brazil, and China, with select items assembled here in the USA. We are headquartered in Miami, FL, and are one of the fastest-growing companies in the area. Our company creates more than 200 unique pieces of professional-grade audio equipment every year. These products are distributed both nationally and internationally, with international distribution channels reaching more than 89 countries. Our consistency and dedication to our craft have netted us revenue growth levels of 300 percent over the last 3 years. We specialize in the professional development of speakers, receivers, amplifiers, components, and a plethora of other products for car audio and home audio systems.