RT Pro RZR XP 1000 HD Radius Rod Kit

Racer Tech's RZR XP 1000 HD (Heavy Duty) Radius Rod Kit will replace the weak factory radius rods with a substantially stronger design. Here's the fix for the weakest link on the RZR XP 1000. These Radius Rods are a direct bolt-on replacement and work with the OEM trailing arm and knuckle/spindle. They are 1.25" dia. USA tubing and use 5/8" FK heim joints. The rods have a little room for adjustments for the inclined rider to tweak the handling a little bit if desired. The adjustment provided from this kit is the static camber settings. By adjusting the rear camber one can control how aggressive the bite of the rear tire is in a corner and find a preferred balance of understeer / oversteer which is how much the machine pushes or slides out in a corner. This setting while controlling handling going into a corner, can also fine tune traction coming out of a turn.

This kit includes the chosen radius rods, heim joints and high misalignment spacers needed for installation. The factory bolts are re-used and there is no modification to the vehicle necessary.

Standard Color Black: Satin Finish (This is our Standard Black. Matches Manufacturer's Standard)

Custom Colors Custom color charge applies to all colors below. Expect lead times up to 6+ weeks for custom colors. No discounts, cancellations or returns on custom colors. Red: RAL 3020 (matches Polaris Red)

Red: RAL 2002 (matches Can-Am Maverick Red)

Orange (Blazin' Orange): RAL 2004 (matches 2012+ Polaris Orange)

Orange (Sparkle Light): 49/25006 (matches pre-2012 Polaris Orange)

Yellow: RAL 1003 (matches Commander Yellow)

Green: RAL 6018 (matches Kawasaki & Arctic Cat Green)

Blue: RAL 5017 (matches Polaris Blue)

White: RAL 9016

Sparkle Silver: RAL 516A 49/90450

Crinkle Black: 361B AKZO 12-7001

Gloss Black: 49/81231

Usually ships in 1-2 weeks.