SYA Warrior Riser Snorkel Kit for Kawasaki Mule Pro FXZoom

SYA Warrior Riser Snorkel Kit for Kawasaki Mule Pro FX

Item# snork-HL-71-11273
$679.95$729.95You Save - $50.00 (7%)
Add LED Light Option: 
Qty:

Description

NOTE: All snorkel kits are non returnable. Installation may require drilling. Confirm vehicle fitment listed below.

Our warrior riser snorkel kits come standard with removable warrior wear tips that snap in easily and unsnap easily for cleaning. Although they are not required to use with the warrior riser, you will have them if and when you need them. They are easily cleaned and reusable and durable for long time use. The water repellent material is from outer wears. Your warrior wear will come unglued so you have the option of custom painting or hydro graphics dipping your parts to match your machine. Easily glued with loctite stick'n seal glue. You may choose to glue them together with the water repellent pre filter material, or to glue together without . Your choice. The CVT outlet should not have the water repellent material in place. The instructions with your kit contain all information on your warrior wear tips.

SYA makes the highest quality and most comprehensive snorkel kit in the industry. Our SYA warrior riser snorkels are the best looking and most professional appearing kits on the market. From fit to finish, our snorkel kits are not only built to perform, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel. Note: you have to cut/trim some plastic to install most snorkel kits.

NOTE: Will not fit the Pro FXT or FXR.

Features:
  • This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre Filter Tips
  • Warrior Wear Pre Filter Tips come unglued for easy painting and gives you the choice of using the water repellent material or not
  • Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
  • Rubber boot connections for easy disassembly
  • All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
  • This is a 2" Snorkel kit - All Hard Pipe Snorkel kit
  • This kit contains three 2" risers.
  • Your bed will still tilt with this kit installed. The riser is connected with easy-to-remove rubber boots.
  • Small area at the top bed rail to trim where the risers show
  • CVT Connections are newly updated for a perfect fit.
  • No Tuning or jetting needed with our kits
  • Comes with Vent lines and connectors
  • This is a full and complete snorkel kit
Fits the Following:
  • 2016 Kawasaki Mule PRO-FX EPS LE
  • 2016 Kawasaki Mule PRO-FX EPS
  • 2016 Kawasaki Mule PRO-FX
  • 2022 Kawasaki Mule PRO-FX
  • 2022 Kawasaki Mule PRO-FX EPS
  • 2022 Kawasaki Mule PRO-FX EPS LE
  • 2017 Kawasaki Mule PRO-FX EPS LE
  • 2017 Kawasaki Mule PRO-FX EPS
  • 2017 Kawasaki Mule PRO-FX
  • 2018 Kawasaki Mule PRO-FX RANCH
  • 2018 Kawasaki Mule PRO-FX EPS LE
  • 2018 Kawasaki Mule PRO-FX EPS
  • 2018 Kawasaki Mule PRO-FX
  • 2019 Kawasaki Mule PRO-FX
  • 2019 Kawasaki Mule PRO-FX EPS LE
  • 2019 Kawasaki Mule PRO-FX EPS
  • 2020 Kawasaki Mule PRO-FX
  • 2020 Kawasaki Mule PRO-FX EPS
  • 2020 Kawasaki Mule PRO-FX EPS LE
  • 2021 Kawasaki Mule PRO-FX
  • 2021 Kawasaki Mule PRO-FX EPS
  • 2021 Kawasaki Mule PRO-FX EPS LE
This item usually ships in 1-2 business days.
Scroll to top